Getting familiar with the Test view

Test aspect overview:

The test view part of the Petals Webconsole allows to perform

several test actions on the selected server, but also provide

informations on the only previous performed exchanges by the test

view. This informations are gathered into a history tab, it displays

the content of IN/OUT/FAULT message sended during the exchange,

the message exchange pattern ...

Test tab

Form part

This tab provides the form which allows you to send message to Petals ESB,

this form is consists of two part, the first is the following:


 
The form contains the following parameters:

  • The endpoint name.
  • The interface name.
  • The service name.
  • Operations found.
  • The IN message content.
  • The message exchange pattern.
  • The timeout in millisecond.
  • The checkbox for manually settings

While the filling of the form you can selected the desired endpoint, following

this selection the Webconsole try to solve the interface/service associated

to the endpoint.

The operation list should also be automatically filled, if the Webconsole

found the associated operations thank to Petals ESB wsdl return.

If operations are available into the operation list, the fact of selecting one

should automatically generate the standard XML template, of the message

content which will be sent.

For the message exchange pattern parameter you can select the four following values:

For more informations on each pattern please refer you to the JBI Specification.

The timeout parameter must be set in millisecond with a int value, as the

MEP parameter refer you to the JBI Specification for the meaning of the

timeout in the message exchange.

The send DONE checkbox allows you to send a DONE message to complete

the exchange after OUT/FAULT/ERROR reception, if the message exchange

pattern allow it.

If the service, interface or operations aren't found, you have the possibility

to set manually the desired parameter by checking the associated checkbox

for manually settings:

     

The second part of the form allows to set:

  • Message exchange properties.
  • Normalized message properties.
  • Attachments.

All previous properties and attachments setted will be sent

with the IN message exchange.

  

Screenshot of the form that allows you to set a normalized/exchange

message property:

The following screenshot represent the add attachment form:

Response part

This following page are displayed after the return of the message exchange :

The screen result is split in two section, the first section displays the message content you sent and

the second section displays to you the returned message content in result. This content can be:

  • A OUT message
  • A FAULT message
  • A ERROR message

History tab

Overview

This tab display into a table message exchanges sent from Test tab. This history table

create one row for each exchange and present many associated exchange informations

like:

  • Message exchange Id.
  • Message exchange pattern.
  • Exchange status.
  • The interface/service/endpoint.

  

Another secondary information but useful is the display of available memory, because keep exchanges sent

cost memory consumption. Think correctly what exchanges must be kept and what others must be removed,

because certain message exchanges with big content or large attachments can take a lot of memory volume.

Detailed row

In the history table you can click on each row in order to display more exchange informations, like message

IN/OUT/FAULT/ERROR content, properties, attachments ...

  

Each message are fully exposed in its concerned part like the following IN message:

each part present the content, properties and attachments of the message.

An OUT message:

Enter labels to add to this page:
Please wait 
Looking for a label? Just start typing.