Petals-BC-JMS 3.0

Version 6 by Vincent Zurczak
on Jul 26, 2011 18:34.

<< Changes from 5 to 6

compared with

Version 7 by Vincent Zurczak
on Jul 27, 2011 10:19.

Changes from 7 to 8 >>

Key

This line was removed.

This word was removed. This word was added.

This line was added.

Changes (27)

View Page History

...

{section}
{column}
h1. Features

The Petals JMS component can be used to interact with an external JMS application or server (through a queue or a topic).
When used with the provider role, it allows to post TextMessages to a JMS queue or topic.
When used with the consumer role, it allows to read messages from a queue or receive messages posted on a given topic.
{column}

{column:width=35%}
{panel:title=Table of contents}{toc}{panel}
{panel:title=Contributors}{contributors:order=name|mode=list}{panel}
{column}
{section}

h1. Recommended Usage

This component should be used whenever interactions with a JMS server or application is required.
This component needs a driver (also called a shared library in Petals) so that Petals can interact with the JMS application. This shared library generally contains the JNDI classes, as a JNDI is used to enable communications between both servers.

\\
{note}* Only JMS TextMessage are recognized by the Petals JMS component.
* With the version 3.0, only XML messages can be published and received from a JMS application.
* In Petals, the invoked service operation is mapped to the _operation_ property of the JMS _TextMessage_ (both in consumming and providing mode).
{note}

h1. Sending a message to a JMS Queue

This use case is similar to [publishing a message on a JMS topic|#Publishing-a-message-to-a-JMS-Topic].

h1. Publishing a message to a JMS Topic

{center}!petals-bc-jms_provide_service.png|width=600px!{center}

h2. Usage

To do that with Petals, you have to create a service associated with the Petals JMS component.
This is achieved by creating a service unit whose jbi.xml contains a *provides* section. When deployed in Petals, the Petals JMS component will emulate a service. When this service is invoked, the received message will be posted as a _TextMessage_ on the topic defined in the service unit configuration.

{note}* All the MEP are allowed. However, due to the JMS paradigm, all exchanges are processed like *InOnly* exchanges. For exemple, an InOut exchange returns a default message if the JMS message is sent succesfully.
* The external Queue or Topic referenced by the Service Unit does not have to be available before the Service Unit is started. But the JNDI server where Queue or Topic are registered must be available before the Service Unit deployment.
* Properties from the Petals message are automatically converted to JMS message properties.
{note}

h2. Configuration

h3. Service Unit descriptor

The Service Unit descriptor file ( jbi.xml ) looks like this:

{code:lang=xml}<?xml version="1.0" encoding="UTF-8"?>

<jbi:jbi version="1.0"
xmlns:generatedNs="http://petals.ow2.org"
xmlns:jbi="http://java.sun.com/xml/ns/jbi"
xmlns:jms="http://petals.ow2.org/components/jms/version-3"
xmlns:petalsCDK="http://petals.ow2.org/components/extensions/version-5"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">


<jbi:services binding-component="true">


<jbi:provides
interface-name="generatedNs:itf"
service-name="generatedNs:srv"
endpoint-name="srvEndpoint">


<petalsCDK:timeout>30000</petalsCDK:timeout>
<petalsCDK:validate-wsdl>true</petalsCDK:validate-wsdl>
<petalsCDK:forward-security-subject>false</petalsCDK:forward-security-subject>
<petalsCDK:forward-message-properties>false</petalsCDK:forward-message-properties>
<petalsCDK:forward-attachments>false</petalsCDK:forward-attachments>
<petalsCDK:wsdl xsi:nil="true" />


<jms:jndi-provider-url>tcp://localhost:61616</jms:jndi-provider-url>
<jms:jndi-initial-context-factory>org.apache.activemq.jndi.ActiveMQInitialContextFactory</jms:jndi-initial-context-factory>
<jms:jndi-destination-name>dynamicQueues/PetalsQueue</jms:jndi-destination-name>
<jms:jndi-connection-factory>QueueConnectionFactory</jms:jndi-connection-factory>
<jms:transacted>false</jms:transacted>
<jms:max-active>10</jms:max-active>
<jms:max-idle>5</jms:max-idle>
<jms:max-wait>10000</jms:max-wait>
<jms:time-between-eviction-runs-millis>30000</jms:time-between-eviction-runs-millis>
<jms:min-evictable-idle-time-millis>600000</jms:min-evictable-idle-time-millis>
<jms:test-while-idle>true</jms:test-while-idle>
</jbi:provides>
</jbi:services>
</jbi:jbi>{code}

\\
{center}{*}Service Unit attributes to provide services*{center}
{table-plus:columnAttributes=,,style="text-align:center;",style="text-align:center;",style="text-align:center;"}

|| {color:#333333}Parameter{color} || {color:#333333}Description{color} || {color:#333333}Default{color} || {color:#333333}Required{color} ||
| provides | Name of the JBI service that will be activated to expose the JMS destination into the JBI environment. Interface (qname), service (qname) and endpoint (string) name are required. | \- | Yes |
| address | Address composed of the URL provider (JNDI access) | \- | Yes |
| destination-name | The JMS destination name where messages will be sent (Queue or Topic JNDI name) | \- | Yes |
| initial-context-factory | The initial-context-factory class name, used to create an InitalContext. | \- | Yes |
| connection-factory | name of the JMS ConnectionFactory registered. | \- | Yes |

| user | User name to access the JMS Destination. | "" | Yes |
| password | Password to access the JMS Destination. | "" | Yes |

| max-active | Controls the maximum number of JMS connections that can be borrowed from the pool at one time. When non-positive, there is no limit to the number of connections that may be active at one time. When maxActive is exceeded, the pool is said to be exhausted. | "10" 10 | No |

| max-idle | Controls the maximum number of JMS connections that can sit idle in the pool at any time. When negative, there is no limit to the number of connections that may be idle at one time. | "5" 5 | No |

| max-wait | If a positive maxWait value is supplied, the JMS component will wait for at most that many milliseconds to retrieve an available JMS connection. If maxWait is non-positive, the component will wait indefinitely. | "10000" 10000 | No |

| time-between-eviction-runs-millis | Indicates how long the eviction thread should sleep before "runs" of examining idle connections. When non-positive, no eviction thread will

be launched. | "10000" 10000 | No |

| min-evictable-idle-time-millis | Specifies the minimum amount of time that a connection may sit idle in the pool before it is eligable for eviction due to idle time. When non-positive,

no connections will be dropped from the pool due to idle time alone. | "2000" 2000 | No |

{table-plus}

...

{table-plus}

{center}{*}Interceptors configuration in the Service Unit*{center}
{table-plus:columnAttributes=,,style="text-align:center;",style="text-align:center;",style="text-align:center;"}

|| {color:#333333}Parameter{color} || {color:#333333}Description{color} || {color:#333333}Default{color} || {color:#333333}Required{color} ||
| name | Name of the interceptor to use. That's the name defined in the component | \- | Yes |

{table-plus}

h3. Service Unit content

...

{code}

h1. Consuming a JBI message from a JMS Queue

This use case is similar to [subscribing to a JMS topic|#Subscribing-to-a-JMS-Topic].

...

{note}

* All MessageExchange patterns MEP are allowed. But, due to the JMS paradigm, all exchanges are processed like *InOnly* exchanges.

* The external Queue or Topic referenced by the Service Unit has to be available before you start the Service Unit.

* Only JMS Text Messages with a XML content can be received.

{note}

{petalslink:author=llacote|type=FIXME Normal qu'on mentionne Weblogic dans une doc composant Petals ?}{petalslink}

h2. Configuration

h3. Service Unit Descriptor

The Service Unit descriptor file ( jbi.xml ) looks like this:

{code}
<?xml version="1.0" encoding="UTF-8"?>
<jbi:jbi xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:petals="http://petals.objectweb.org/extensions"
xmlns:jbi="http://java.sun.com/xml/ns/jbi" version="1.0">
<jbi:services binding-component="false">
<jbi:consumes interface-name="{http://petals.objectweb.org}HelloworldInterface">
<petals:params>
<petals:param name="address">scn://localhost:26400</petals:param>
<petals:param name="destination-name">queueConsumer</petals:param>
<petals:param
name="initial-context-factory">fr.dyade.aaa.jndi2.client.NamingContextFactory</petals:param>
<petals:param name="connection-factory">qcf</petals:param>
<petals:param name="user">anonymous</petals:param>
<petals:param name="password">anonymous</petals:param>
<petals:param name="transacted">false</petals:param>
<petals:param name="operation">printMessage</petals:param>
</petals:params>
</jbi:consumes>
</jbi:services>
</jbi:jbi>
{code}
JMS communication attributes:

JMS communication attributes:

{code}<?xml version="1.0" encoding="UTF-8"?>

<jbi:jbi version="1.0"
xmlns:generatedNs="http://petals.ow2.org"
xmlns:jbi="http://java.sun.com/xml/ns/jbi"
xmlns:jms="http://petals.ow2.org/components/jms/version-3"
xmlns:petalsCDK="http://petals.ow2.org/components/extensions/version-5"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">


<jbi:services binding-component="true">


<jbi:consumes
interface-name="generatedNs:itf"
service-name="generatedNs:srv"
endpoint-name="srvEndpoint">


<petalsCDK:timeout>30000</petalsCDK:timeout>
<petalsCDK:operation xmlns:wedontcareNs="http://something">wedontcareNs:wedontcare</petalsCDK:operation>
<petalsCDK:mep>InOnly</petalsCDK:mep>


<jms:jndi-provider-url>tcp://localhost:61616</jms:jndi-provider-url>
<jms:jndi-initial-context-factory>org.apache.activemq.jndi.ActiveMQInitialContextFactory</jms:jndi-initial-context-factory>
<jms:jndi-destination-name>dynamicTopics/PetalsTopic</jms:jndi-destination-name>
<jms:jndi-connection-factory>ConnectionFactory</jms:jndi-connection-factory>
<jms:transacted>false</jms:transacted>
</jbi:consumes>
</jbi:services>
</jbi:jbi>{code}

{center}{*}Service Unit attributes to provide consume services*{center}

{table-plus:columnAttributes=,,style="text-align:center;",style="text-align:center;",style="text-align:center;"}

...

| user | User name to access the JMS Destination. | "" | Yes |
| password | Password to access the JMS Destination. | "" | Yes |

| operation | JMS operation property. | \- | Yes |
{table-plus}

...

0 for no timeout. \\
int number >= 0 for a timeout. | \- | No |

| org.objectweb.petals.routing.strategy | This property defines the routing strategy. Two kind of strategies can be defined: highest or random. The others parameters represents respectively the local ponderation, the ponderation of the remote active endpoint and
the ponderation of the remote inactive endpoint. \\
The 'random' strategy chooses an endpoint in function of defined ponderations. The endpoints that have the strongest ponderation can be more easely choose in comparison with the others. \\
The 'highest' strategy chooses the first endpoint in the list that have the
strongest ponderation. | \- | No |
| org.objectweb.petals.transport.compress | The payload of a MessageExchange is an XML file. It can be interesting to compress it before messages are exchanged between two PEtALS nodes. \\
Values are {{true}} or {{false}}. True activates the compression of the message content. | \- | No |
| org.objectweb.petals.messaging.noack | All JBI exchanges end by a message containing a DONE or ERROR status. The consumer must accept those messages, otherwise they are accumulated in the NMR. Moreover, thoses messages cause useless trafic. \\
Values are {{true}} or {{false}}. True make DONE or ERROR messages not sent.
| \- | No |
| org.objectweb.petals.transport.qos | This property sets up the policy of the Quality of Service supported by Petals Transporter. \\
Possible values are: {{reliable}}, {{fast}}. If not specified, the reliable policy is selected by default. | "reliable" | No |

| operation | JMS operation property. | \- | Yes |
{table-plus}

h3. Service Unit content

The Service Unit has to contain the following elements, packaged in an archive:
* The META-INF/jbi.xml descriptor file, has described above

{code}
service-unit.zip

...

h1. Component Configuration

The following attributes can be set during the installation phase to configure the component, using the params element of the jbi-install-component ANT task:
no configuration for this component (JBI).

This component has no specific parameter.
It only inherits those from the CDK (the framework used to develop this component).

{center}{*}Configuration of the component (CDK)*{center}
{table-plus:columnAttributes=,,style="text-align:center;",style="text-align:center;",style="text-align:center;"}

...

* an URL
* a file relative to the PEtALS installation path

* an empty value to stipulate a non-using file | \- | No | Installation |

| external-listener-class-name | Qualified name of the class extending *AbstractExternalListener* {note}Only for Binding Components{note} | \- | No |
| jbi-listener-class-name | Qualified name of the class extending *AbstractJBIListener* | \- | Yes |

| external-listener-class-name | Qualified name of the class extending *AbstractExternalListener* | \- | No |

{table-plus}

{center}{*}Interceptors configuration in the component*{center}
{table-plus:columnAttributes=,,style="text-align:center;",style="text-align:center;",style="text-align:center;"}

|| {color:#333333}Parameter{color} || {color:#333333}Description{color} || {color:#333333}Default{color} || {color:#333333}Required{color} ||
| class | Name of the interceptor class. This class must extend the abstract class org.objectweb.petals.component.common.interceptor.Interceptor. This class have to be present in the classloader, in component or CF or in a shared library. | \- | Yes |
| name | Name of the interceptor. This name will be used for additional class name
configuration in the SU. | class name | No |
| active | Interceptor is active for all SU | true | No
{table-plus}

{petalslink:author=llacote|type=FIXME Voir ci le chapitre Samples ci-dessous peut être déplacé dans une page Use Case spécifique}{petalslink}

h1. Samples

Two usecases are defined in this section:
* The send of JMS Messages to the JBI Helloworld Service Engine.
* The send of JBI Messages to the JMS External provider.

This section presents how to install the different components and service assemblies to realize these use cases.
In each case, the external JMS Server where the client and provider queue are defined must be started in first.

h2. Install the External JMS Server
To install the external JMS server, you must download and extracts the zip archive at this url:
[Specify joram client link here|petalsesb:maven.objectweb.org/maven2/org/objectweb/petals/usecase/jms/petals-jms-client/1.0-SNAPSHOT/petals-jms-client-1.0-SNAPSHOT-with-dependencies.zip].
This package also contains the external jms Client and Provider used in the next sections.
Insert all jars in your classpath and start the JMS server with the command below:
{code}java org.objectweb.petals.usecase.jms.common.JMSServer{code}
If it is OK, you must see the lines below:
{code}
Start JORAM server S0...
...JORAM server S0 started
(connected)
Initialize JMS service...
(connect to JORAM server)
(Creation of the queue: queueConsumer)
(Queue created)
(Queue bound)
(Creation of the queue: queueProvider)
(Queue created)
(Queue bound)
(disconnect from JORAM server)
JMS destinations initialized...
{code}
Now, the external JMS Server is ready and the client and provider queues (respectively, queueConsumer and queueProvider) have been created. You can execute the usecases below.

h2. Send a JMS Message to the JBI Helloworld Service Engine
To send a JMS Message to the JBi HelloWorld Service Engine, you must install several components in the order listed below:
# The HelloWorld Service Engine component ([Download here|petalsesb:maven.objectweb.org/maven2/org/objectweb/petals/petals-se-helloworld/1.4-SNAPSHOT/petals-se-helloworld-1.4-SNAPSHOT.zip]).
# The JMS binding component ([Download here|petalsesb:maven.objectweb.org/maven2/org/objectweb/petals/petals-bc-jms/1.3-SNAPSHOT/petals-bc-jms-1.3-SNAPSHOT.zip]).
# The sa-jms-consume service assembly ([Download here|petalsesb:maven.objectweb.org/maven2/org/objectweb/petals/usecase/jms/sa-jms-consume/1.0-SNAPSHOT/sa-jms-consume-1.0-SNAPSHOT.zip]). This service assembly contains one service unit:
{{su-jms-consume}} service unit. This service unit consumes the endpoint defined by the next service unit.
Once these components are installed, you must install the JMS client.
To install the JMS client, you must download and extracts the zip archive at this url:
[Specify joram client link here|petalsesb:maven.objectweb.org/maven2/org/objectweb/petals/usecase/jms/petals-jms-client/1.0-SNAPSHOT/petals-jms-client-1.0-SNAPSHOT-with-dependencies.zip]

By default, the JMS client is started in console mode.
Inserts all jars in your classpath and start the JMS client with the command below:
{code}java org.objectweb.petals.usecase.jms.client.Client{code}
If it is OK, you must see the lines below:
{code}
Start the Echo JMS client...
-------------------------------
The parameters used for this client are listed below:
-user=anonymous
-password=anonymous
-connection-factory=qcf
-queue-name=queueConsumer
-file=null
No file has been given in input:
You can write the xml message to send in the console or write 'quit' to exit ...(for instance:
<text>hello world</text>)
=>
{code}

You can write an xml message and verify that it has been received by the helloworld component.
If you want that the JMS client send a xml file to the helloworld, you can configure it with the 'file' option as seen below:
{code}java org.objectweb.petals.usecase.jms.common.Client -file=test.xml{code}
the test.xml file is shown below:
{code:lang=xml}<jms>
<text>Hello World</text>
</jms>
{code}
All these components can be seen on Figure 3.1, “The sa-jms-consume use case”
{center}!petals-bc-jms_use-case_sa-jms-consume.png|width=600px!{center}
{center}_Sa-jms-consumes mechanics_{center}
h2. Send a JBI Message to the external JMS provider
To send a JBI Message to the external JMS provider, you must install several components in the order listed below:
* The Sample Client Service Engine component ([Download here|http://maven.ow2.org/maven2/org/objectweb/petals/petals-se-sampleclient/1.4-SNAPSHOT/petals-se-sampleclient-1.4-SNAPSHOT.zip]).
* The JMS binding component ([Download here|petalsesb:maven.objectweb.org/maven2/org/objectweb/petals/petals-bc-jms/1.3-SNAPSHOT/petals-bc-jms-1.3-SNAPSHOT.zip]).
* The sa-jms-provide service assembly ([Download here|petalsesb:maven.objectweb.org/maven2/org/objectweb/petals/usecase/jms/sa-jms-provide/1.0-SNAPSHOT/sa-jms-provide-1.0-SNAPSHOT.zip]). This service assembly contains one service unit:
the {{su-jms-provide}} service unit. This service unit provides an endpoint to contact the external JMS provider.
Once these components are installed, you must install the JMS provider.
To install the JMS provider, you must download and extracts the zip archive at this url:
[Specify joram client link here|petalsesb:maven.objectweb.org/maven2/org/objectweb/petals/usecase/jms/petals-jms-client/1.0-SNAPSHOT/petals-jms-client-1.0-SNAPSHOT-with-dependencies.zip]

Inserts all jars in your classpath and start the JMS provider with the command below:
{code}java org.objectweb.petals.usecase.jms.provider.Provider{code}
If it is OK, you must see the lines below:
{code}
Start the JMS Echo services...
-------------------------------
The parameters used for this server are listed below:
-user=anonymous
-password=anonymous
-connection-factory=qcf
-queue-name=queueProvider
Start the message receiver...
Message receiver started...
... JMS Echo services started...
Creating message receiver...
MsgListener ready to listen for Receiver
{code}
Now, the external JMS provider is ready to receive messages. You can use the sample client to send xml message to the endpoint defined by the su-jms-provide service unit.
All these components can be seen on figure below, “The sa-jms-provide usecase”.
{center}!petals-bc-jms_use-case_sa-jms-provide.png|width=600px!{center}

Wiki

All versions of Petals ESB

Helpful links

Petals-BC-JMS 3.0

Changes (27)