{section}
{column}

h1. Features

The Validation Service-Engine allows to validate and filter Petals messages against an XML Schema.

\\
Each configuration of this component embeds an XML Schema (made up of one or several XSD files).
When such a configuration (i.e. service, i.e. service-unit) is called, it validates the received message against the XML Schema.
Depending on the called operation, the returned message is either a boolean (*validate* operation) or the received message or a fault (*filter* operation).
*filter* and *validate* are the only operations this component supports.

\\
This component only acts as service provider, not as a service consumer.
In fact, it provides a validation / filtering service (the filtering relies on the validity of the message against the XML Schema).
{column}

{column:width=350px}
{panel:title=Table of contents}{toc}{panel}
{panel:title=Contributors}{contributors:order=name|mode=list}{panel}
{column}
{section}

h1. Recommended usage


\\
{tip}
The Validation component may be used before calling a critical service.
It allows to make sure the message to send has the right shape.
For some services, this can be useless. For some others though, it can be critical to perform this check.
{tip}

h2. A typical example

One typical example would be a service converting the received message as data and manipulating it then (e.g. to insert it into a database).
In Petals ESB, that would concern the Petals-BC-SQL component or even the Petals-SE-Talend component.
Notice that this last one has a built-in feature to validate received messages against the job's WSDL.

Another example could be a service that accesses an EJB.
The received message is mapped to a Java object that is about to be manipulated in a JEE container.
Making sure the sent message is valid may prevent errors from occurring later in the processing.

\\
In a perfect SOA world, this component would be useless.
Every service would have a WSDL, and every service consumer would rely on this WSDL to send a message.
But this is only good practices. It happens that service consumers do not send the perfect messages.

It can be the case with *integration* use cases (e.g. with an EIP - Enterprise Integration Pattern - or a POJO that consumes a service by generating dynamically the message to send).
Before calling this service, you might want to ensure the validity of the built message. An this is where you will use the Validation component.

\\
Roughly, the principle looks like

{code:lang=java}
if( validationService.validate( MSG )) {
criticalService.criticalOperation( MSG );
}
else {
log( "The message was invalid." );
}
{code}


h2. Validation and chaining services

Following our previous algorithm, it appears that validating or filtering a message only makes sense if this message is going to be sent to another service.
That supposes that there is a chaining service, that will first call the validation service, and then call the real target service.

# Message from the chaining service to the validation / filtering service.
# Response from the validation / filtering service to the chaining service (the MEP is InOut, always, no matter what the operation is).
# Message from the chaining service to the real target service.
# Optional response, depending on the MEP for the second service.

\\
This chaining service can be implemented by a POJO (an home made Java Class) or an Enterprise Integration Pattern (EIP).
It could also be implemented by a BPEL process, but this latter needs that the WSDL proposed by the Validation component is correct and completed.
Note that BPEL can validate by itself the message during its processing, so it may be useless to use the Validation component in some cases.

Each Validation service runs on the Petals Validation component.
The Petals Validation component has native operations to invoke. These operations are inherited by the Validation services.
A Validation service cannot add additional operations. It only has the ones of the XSLT component.

The version 1.1 of the Petals Validation component exposes two operations.
* *validate*: the received message is validated against a XML-Schema. The service returns a boolean response indicating if the message is valid.
* *filter*: the received message is validated against a XML-Schema. If the message is valid, this same message is returned. Otherwise, a fault is raised.


h2. The "validate" operation

The fully qualified name of this operation is:
* Name space URI: *{html}http://petals.ow2.org/components/validation/version-1{html}\*
* Local part: *validate*

\\
This operation only supports the *InOut* message exchange pattern (MEP).
When invoking this operation, you must call it using its fully qualified name.

\\
Here is the execution flow for this operation:
# The received message is validated against the XML-Schema embedded by the service.
# The validation response is wrapped into a message and sent back.

\\
More precisely, if the message is valid, the returned message is

{code:lang=xml}
<!-- The target name space depends on the version of the Validation component -->
<tns:validateResponse xmlns:tns='http://petals.ow2.org/components/validation/version-1'>
<tns:valid>true</tns:valid>
</tns:validateResponse>
{code}

\\
Otherwise, it is

{code:lang=xml}
<!-- The target name space depends on the version of the Validation component -->
<tns:validateResponse xmlns:tns='http://petals.ow2.org/components/validation/version-1'>
<tns:valid>false</tns:valid>
<tns:comment>The reason explaining why it is invalid.</tns:comment>
</tns:validateResponse>
{code}


h2. The "filter" operation

The fully qualified name of this operation is:
* Name space URI: *{html}http://petals.ow2.org/components/validation/version-1{html}\*
* Local part: *filter*

\\
This operation only supports the *InOut* message exchange pattern (MEP).
When invoking this operation, you must call it using its fully qualified name.

\\
Here is the execution flow for this operation:
# The received message is validated against the XML-Schema embedded by the service.
# If the message is valid, this same message is sent back. Otherwise, a fault is raised.

\\
{code:lang=xml}
<!-- The target name space depends on the version of the Validation component -->
<tns:validationFault xmlns:tns='http://petals.ow2.org/components/validation/version-1'>
<tns:message>The fault message.</tns:message>
<tns:validationFault>
{code}

\\
{warning}
If the operation is invalid (i.e. is neither *validate*, nor *filter*), then *filter* is the operation by default.
{warning}


h2. WSDL definitions

By default, services deployed on the Validation component do not need a WSDL.
However, as a good practice, it is better to provide it one.

The operations are known.
The only unknown is whether the input messages will be *anyType* or the *exact top element of the XML Schema*.
It is let to the choice of the user.

The output message for the operation *filter* should however be described by the XML Schema.


h2. JBI descriptor

The Service Unit descriptor file ( jbi.xml ) looks like this:
{code:lang=xml}<?xml version="1.0" encoding="UTF-8"?>
<jbi:jbi version="1.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:jbi="http://java.sun.com/xml/ns/jbi"
xmlns:petalsCDK="http://petals.ow2.org/components/extensions/version-5"
xmlns:validation="http://petals.ow2.org/components/validation/version-1"
xmlns:serviceNs="http://petals.ow2.org/simpletransformation">

<jbi:services binding-component="false">
<jbi:provides
interface-name="serviceNs:ValidationInterface"
service-name="serviceNs:ValidationService"
endpoint-name="ValidationEndpoint">

<!-- WSDL file -->
<petalsCDK:wsdl>your optional description wsdl file.wsdl</petalsCDK:wsdl>

<!-- Validation specific fields -->
<validation:schema>schema.xsd</validation:schema>
</jbi:provides>
</jbi:services>
</jbi:jbi>
{code}

\\
A JBI descriptor for an Validation service-unit can only define one _provides_ block.

\\

{include:0 CDK SU Provide Configuration}


{center}

*Configuration of a Service Unit to provide a service (Validation)*
{center}

|| Parameter || Description || Default || Required ||
| schema | Location of the XSD schema. This path must be a relative path from the root of the SU package. \\ | \- | Yes |




h2. Service-Unit content

The service unit must contain the XML Schema and the JBI descriptor (jbi.xml file).
It is also highly recommended to provide a WSDL description for this service (though it is optional).
This WSDL is not mandatory, but not providing it will prevent your service from interacting with other Petals services and components.

\\
The directory structure of a SU for the Petals-SE-Validation looks like this:

{noformat}
su-xslt-TransformationName-provide.zip
+ META-INF
- jbi.xml
+ XsltService.wsdl (recommended)
+ myfile.xsd (required)
+ myfile2.xsd (required if myfile2.xsd is imported in myfile.xsd)
{noformat}


h1. Configuring the component

The component can be configured through its JBI descriptor file, as shown below.
{code:lang=xml}<?xml version="1.0" encoding="UTF-8"?>
<?xml version="1.0" encoding="UTF-8"?>
<jbi version="1.0"
xmlns='http://java.sun.com/xml/ns/jbi'
xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance'
xmlns:petalsCDK="http://petals.ow2.org/components/extensions/version-5">

<component type="service-engine">
<identification>
<name>petals-se-validation</name>
<description>A VALIDATION Service Engine</description>
</identification>

<component-class-name description="Validation Component class">org.ow2.petals.se.validation.ValidationComponent</component-class-name>
<component-class-path><path-element/></component-class-path>
<bootstrap-class-name>org.ow2.petals.component.framework.DefaultBootstrap</bootstrap-class-name>
<bootstrap-class-path><path-element/></bootstrap-class-path>

<petalsCDK:acceptor-pool-size>3</petalsCDK:acceptor-pool-size>
<petalsCDK:processor-pool-size>10</petalsCDK:processor-pool-size>
<petalsCDK:ignored-status>DONE_AND_ERROR_IGNORED</petalsCDK:ignored-status>
<petalsCDK:notifications>false</petalsCDK:notifications>
<petalsCDK:jbi-listener-class-name>org.ow2.petals.se.validation.listener.JBIListener</petalsCDK:jbi-listener-class-name>
</component>
</jbi>{code}


\\
The component configuration includes the configuration of the CDK. The following parameters correspond to the CDK configuration.
{include:0 CDK Component Configuration Table}

\\
This component does not have any specific configuration parameter.