{section}
{column}

h1. Features

The XSLT Service-Engine allows to transform Petals messages using XSL style sheets.

\\
Each configuration of this component embeds an XSL style sheet.
When such a configuration (i.e. service, i.e. service-unit) is called, it transforms the received message into another one.
The XML payload of the input message is transformed using the XSL style sheet.
The resulting XML document is then returned in the response, either as the payload, or as an attachment.

\\
This component only acts as service provider, not as a service consumer.
In fact, it provides a transformation service.

\\
Additional information about XSLT can be found at [http://www.w3.org/TR/xslt].
{column}

{column:width=350px}
{panel:title=Table of contents}{toc}{panel}
{panel:title=Contributors}{contributors:order=name|mode=list}{panel}
{column}
{section}

h1. Recommended usage

\\
{tip}
The XSLT component should be used when chaining calls to services whose output and input do not match.
It can also be used to expose XSL transformations as a service, provided that the content to transform is passed in the message payload, and not as attachment.
{tip}


h2. Taking an example

Let's take the example of two "white pages" services.
These services aims at helping in finding where a person lives (or how to contact this person).

\\
First, you want to call the operation *lookup* of a service "*White Pages*".
This operation takes the first name and the family name of a person, and returns a list of phone numbers.
Each phone number is given as a string.

Its prototype looks like

{code:lang=javascript}
lookup( String firstName, String familyName ) --> String[] phoneNumbers
{code}

Do not forget this prototype would be in fact described in the WSDL interface of the service (under an XML shape).

\\
Then, you want to call a service that finds a geographical area (e.g. a city) from a phone prefix.
It is the operation *resolve* from a service "*PrefixToAreaLocalizer*".
From a phone prefix, it returns a geographical area.

Its prototype looks like

{code:lang=javascript}
resolve( int phonePrefix ) --> String areaName
{code}

Once again, this prototype is described in the WSDL interface of this second service.

\\
To chain these calls, you have to transform the output of the operation *lookup* to match the input of the operation *resolve*.
Indeed, you cannot directly execute

{code:lang=java}
resolve( lookup( "Pierre", "Paul"));
{code}

\\
What you will do in your XSL style sheet is extracting the phone prefix from a phone number.
The list go-through will most likely not be made in the XSLT transformation.

\\
There is no more simple way to make the transformation.
In Petals, as well as in most of SOA-related technologies, messages are XML messages.
And for every service, the operations, with their in and out parameters, are described in their WSDL interface.
So, the output message of the *resolve* operation is an XML (SOAP) message, and the input message of *resolve* operation is an XML message too.
These XML messages must match the WSDL descriptions of these services.

\\
Obviously, this example is extremely simple.
But the usage remains the same, even with complex XML structures.


h2. XSLT and chaining services

Following our previous example, it appears that chaining and transforming service calls implies using a chaining service (some could say an orchestration service).
This chaining service would do the following calls:

# Message from the chaining service to a first service.
# Response from the first service to the chaining service (we assume the first service works in InOut message exchange pattern).
# Message from the chaining service to the XSLT service.
# Response from the XSLT service to the chaining service (the MEP is InOut, always).
# Message from the chaining service to a second service. The transformed message is sent to it.
# Optional response, depending on the MEP for the second service.

\\
This chaining service can be implemented by a POJO (a Java service that runs in Petals) or an Enterprise Integration Pattern (EIP).
It could also be implemented by a BPEL process, but in fact, that would not be a great idea.
BPEL supports the extraction of data from XML messages during the orchestration. When you have a BPEL process, you do not need XSLT. You can use XPath expressions and functions directly in the BPEL. Besides, working with BPEL would require the XSLT configuration to have a WSDL interface while they do not always have one.


h2. Limitations and warnings

{note}
The transformed content is always the payload from the input message.
{note}

\\
{note}
Do not mistake XSLT services for interceptors.
{note}

A XSL transformation service cannot transform messages addressed to another service.
Neither to transform attachments, nor to intercept messages on the fly. An orchestration service is required to make the link.
Interceptors would better fit this kind of use case.

\\
{note}
You have to use Java *endorsed* mechanism to work with XSL style sheets of more than 1000 lines.

h1. Creating a XSL Transformation service (Provides modes)

Each XSLT service runs on the Petals XSLT component.
The Petals XSLT component has native operations to invoke. These operations are inherited by the XSLT services.
A XSLT service cannot add additional operations. It only has the ones of the XSLT component.

\\
The version 2.3 of the Petals XSLT component exposes two operations.
* *transform*: the received message is transformed with the XSL style sheet. The transformation result is returned as the response payload.
* *transformToAttachment*: the received message is transformed with the XSL style sheet. The transformation result is attached to the response.


h2. The "transform" operation

\\
This operation only supports the *InOut* message exchange pattern (MEP).
When invoking this operation, you must call it using its fully qualified name.
It must also be the operation name in the WSDL of any XSLT service.

\\
Here is the execution flow for this operation:
# The received message is transformed with the XSL style sheet.
# The transformation result is returned as the response payload.

\\
The result of the transformation depends on the XSL style sheet.


h2. The "transformToAttachment" operation

\\
This operation only supports the *InOut* message exchange pattern (MEP).
When invoking this operation, you must call it using its fully qualified name.
This operation cannot be described in a WSDL, because of the result it returns.

\\
Here is the execution flow for this operation:
# The received message is transformed with the XSL style sheet.
# The transformation result is attached to the response.

\\
The attachment is not sent in MTOM mode.
The result of the transformation has always the same shape.

{code:lang=xml}
<attached-files>
<file-name>myOutputAttachmentName</file-name>
<attached-files>
{code}

... where _myOutputAttachmentName_ is the name of the attachment (as specified in the service-unit, or a default value otherwise).
This operation will most likely be depreciated in future versions.


h2. WSDL definitions

Configurations (service-units) for the XSLT component do not have, in general, a WSDL definition.
However, it is possible to define one. This WSDL can only describe the *transform* operation.
The *transformToAttachment* operation cannot be described in a WSDL. This last operation is rather intended for integration use cases.
This is also why this operation will probably be marked as depreciated in the next version.

\\
The input and output messages for the *transform* operation are related to the XSL style sheet.
In fact, the input message should be the output message of the previous chained service (the one whose output must be transformed).
And the output message should be the input message of the next chained service.

\\
As said at the beginning of this section, WSDL are not mandatory though. Typically, integration use cases do not require one. But not having one is bad practice in SOA.
Your XSLT service is then not reusable, and no one else will ever use it unless you give him the XSL style sheet to determine the expected input and output.

\\
{tip}
Beginning by creating a WSDL, and then continuing by the XSL style sheet appears as the best practice to have.
{tip}


h2. JBI descriptor

The Service-Unit descriptor file ( jbi.xml ) looks like this:
{code:lang=xml}<?xml version="1.0" encoding="UTF-8"?>
<!--
JBI descriptor for the Petals' "petals-se-xslt" component (XSLT).
Originally created for the version 2.3 of the component.
-->
<jbi:jbi version="1.0"
xmlns:generatedNs="http://petals.ow2.org/components/xslt/version-2"
xmlns:jbi="http://java.sun.com/xml/ns/jbi"
xmlns:petalsCDK="http://petals.ow2.org/components/extensions/version-5"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xslt="http://petals.ow2.org/components/xslt/version-2">

<!-- Import a Service into Petals or Expose a Petals Service => use a BC. -->
<jbi:services binding-component="false">

<!-- Import a Service into Petals => provides a Service. -->
<jbi:provides
interface-name="generatedNs:XsltInterface"
service-name="generatedNs:PersonLocalizer"
endpoint-name="PersonLocalizerEndpoint">

<!-- CDK specific elements -->
<petalsCDK:timeout>30000</petalsCDK:timeout>
<petalsCDK:validate-wsdl>true</petalsCDK:validate-wsdl>
<petalsCDK:forward-security-subject>false</petalsCDK:forward-security-subject>
<petalsCDK:forward-message-properties>false</petalsCDK:forward-message-properties>
<petalsCDK:forward-attachments>false</petalsCDK:forward-attachments>
<petalsCDK:wsdl>XsltService.wsdl</petalsCDK:wsdl>

<!-- Component specific elements -->
<xslt:stylesheet>fromTo.xsl</xslt:stylesheet>

<!-- The following parameter is optional -->
<xslt:output-attachment-name>TransformedMessage</xslt:output-attachment-name>
</jbi:provides>
</jbi:services>
</jbi:jbi>
{code}

\\

The service unit must contain the XSL style sheet.
It is also highly recommended to provide a WSDL description for this service.
This WSDL is not mandatory, but not providing it will prevent your service from interacting with other Petals services and components.

The archive may also embed a JAR containing the custom functions referenced in the XSL style sheet, if any.

\\
The directory structure of a SU for the Petals-SE-XSLT looks like this:

{noformat}
su-xslt-TransformationName-provide.zip
+ META-INF
- jbi.xml
+ XsltService.wsdl (recommended)
+ <XSL style sheet>.xsl
+ customFunctions.jar (optional)
{noformat}


h1. Configuring the component

The component can be configured through its JBI descriptor file, as shown below.
{code:lang=xml}<?xml version="1.0" encoding="UTF-8"?>
<?xml version="1.0" encoding="UTF-8"?>
<jbi
version="1.0"
xmlns='http://java.sun.com/xml/ns/jbi'
xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance'
xmlns:petalsCDK="http://petals.ow2.org/components/extensions/version-5">

<component type="service-engine">
<identification>
<name>petals-se-xslt</name>
<description>A Xslt Service Engine</description>
</identification>

<component-class-name description="Xslt Component class">org.ow2.petals.se.xslt.XsltComponent</component-class-name>
<component-class-path><path-element/></component-class-path>
<bootstrap-class-name>org.ow2.petals.component.framework.DefaultBootstrap</bootstrap-class-name>
<bootstrap-class-path><path-element/></bootstrap-class-path>

<petalsCDK:acceptor-pool-size>3</petalsCDK:acceptor-pool-size>
<petalsCDK:processor-pool-size>10</petalsCDK:processor-pool-size>
<petalsCDK:ignored-status>DONE_AND_ERROR_IGNORED</petalsCDK:ignored-status>
<petalsCDK:notifications>false</petalsCDK:notifications>
<petalsCDK:jbi-listener-class-name>org.ow2.petals.se.xslt.listener.JBIListener</petalsCDK:jbi-listener-class-name>
</component>
</jbi>{code}

This component does not have any specific configuration parameter.