E-mail
|
Key
This line was removed.
This word was removed. This word was added.
This line was added.
|
Comment:
Changes (1)
View Page History
...
{section} {column}
h1. Feature
The FTP component is a Binding Component (BC) which supports FTP command.
This component provide a set of 5 operations:
* *put:* Write the received JBI messages in a file with a specified name.
...* *mput:* Write the JBI message attachments it receives into files. * *get:* Retrieve *Xml* file corresponding to a pattern, from a folder. Return it as message payload.
* *getAsAttachment:* Retrieve the first file corresponding to a pattern, from a folder. Return it as message's attachment.(XOP standard)
* *mGet:* Retrieve files corresponding to a pattern, from a folder. Return them as message's attachment.
* *checkFile:* Check the availability of a file.
* *del:* Delete one file.
* *dir:* List the content of a folder.
These operations are described in an embedded WSDL.
{warning}This version must be installed on Petals ESB 5.0.0+{warning}
{info}All attachment are processed by using XOP rules.(XML-binary Optimized Packaging : [http://www.w3.org/TR/xop10/] ){info}
{column}
{column:width=350px}
{panel:title=Table of contents}{toc:outline=true}{panel}
{panel:title=Contributors}{contributors:order=name|mode=list|showAnonymous=true|showCount=true|showLastTime=true}{panel}
{column}
{section}
h1. Exposing a FTP connection as a service
In provide mode, the component expose an external service in the JBI environment to send FTP commands on an FTP server.
The component can expose directly a generic FTP service without deploying a service unit (*Generic mode*) or use a service-unit (*Service-unit mode*).
In generic mode, parameter for the FTP connection are set in the XML message request in a connection node (see [Generic Mode configuration|#GenericModeConfiguration]).
h2. Usage
{info}
* Operation need to be call explicitely in the form : \{service-namespace}operation
Example : \{[http://petals.ow2.org/components/ftp/version-3|http://petals.ow2.org/components/sftp/version-1]}put
* All operations support wild card character
{info}
h3. Put Operation
When the put operation is set on the incoming IN message, the component write the XML message to the FTP server.
\\
The IN message looks like :
{code:lang=xml}<?xml version="1.0" encoding="UTF-8"?>
<ver:put xmlns:ver="http://petals.ow2.org/components/ftp/version-3">
<ver:body>xml body</ver:body>
<ver:filename>file name on the FTP server</ver:filename>
<!--Optional:-->
<ver:connection>
...
</ver:connection>
</ver:put>
{code}
The service does not return a message.
The service might return an error when an element in the request is missing or if the FTP connection failed.
The available exchange pattern is : *InOnly*.
\\
h3. MPut Operation
When the mput operation is set on the incoming IN message, the component write the attachments on the FTP server.
The IN message looks like :
{code:lang=xml}<?xml version="1.0" encoding="UTF-8"?>
<ver:mput xmlns:ver="http://petals.ow2.org/components/ftp/version-3">
<ver:attachments>
<ver:filename><xop:Include xmlns:xop="http://www.w3.org/2004/08/xop/include" href="cid:test1.xml"/></ver:filename>
<ver:filename><xop:Include xmlns:xop="http://www.w3.org/2004/08/xop/include" href="cid:test2.xml"/></ver:filename>
</ver:attachments>
</ver:mput>
{code}
The service does not return a message.
\\
The service might return an error when an element in the request is missing or if the FTP connection failed.
The available exchange pattern is : *InOnly*.
\\
h3. Get Operation
When the get operation is set on the incoming IN message, the component retrieve ONE file from the FTP server and return it as an XML message content.
\\
The name of the file to retrieve is set in the XML IN content of the message.
\\
The IN message looks like :
\\
{code:lang=xml}<?xml version="1.0" encoding="UTF-8"?>
<ver:get xmlns:ver="http://petals.ow2.org/components/ftp/version-3">
<ver:filename>file name to retrieve</ver:filename>
</ver:get>
{code}
The OUT message returned to the consumer is the content of the XML file
\\
The service might return a Fault when an element in the request is missing or if the FTP connection failed
\\
The available exchange patterns is : *InOut*.
{info}Only xml file could be processed otherwise an error will be raised.{info}
h3. GetAsAttachment Operation
When the get operation is set on the incoming IN message, the component retrieve ONE file from the FTP server and return it as an attachment.
The name of the file to retrieve is set in the XML IN content of the message.
The IN message looks like :
{code:lang=xml}<?xml version="1.0" encoding="UTF-8"?>
<ver:getAsAttachment xmlns:ver="http://petals.ow2.org/components/ftp/version-3">
<ver:filename>file name to retrieve</ver:filename>
</ver:getAsAttachment>
{code}
The OUT message returned to the consumer contains the retrieved file, as attachment:
{code:lang=xml}<?xml version="1.0" encoding="UTF-8"?>
<tns:getAsAttachmentResponse xmlns:tns="http://petals.ow2.org/components/ftp/version-3">
<tns:attachment>
<tns:filename><xop:Include xmlns:xop="http://www.w3.org/2004/08/xop/include" href="cid:test1.xml"/></tns:filename>
</tns:attachment>
</tns:getAsAttachmentResponse>
{code}
The service might return a Fault when an element in the request is missing or if the FTP connection failed
The available exchange pattern is : *InOut*.
h3. MGet Operation
When the mget operation is set on the incoming IN message, the component retrieves files from the FTP server, according to the file names (or filters) set in the XML request.
\\
There is no recursivity, sub folders are ignored.
Each file is set in the OUT message as an attachment. The IN message looks like:
\\
{code:lang=xml}<?xml version="1.0" encoding="UTF-8"?>
<ver:mget xmlns:ver="http://petals.ow2.org/components/ftp/version-3">
<!--1 or more repetitions:-->
<ver:filename>*.xml</ver:filename>
<ver:filename>myFile.txt</ver:filename>
</ver:mget>
{code}
The OUT message returned to the consumer contains files, as attachments:
\\
{code:lang=xml}<?xml version="1.0" encoding="UTF-8"?>
<tns:mgetResponse xmlns:tns="http://petals.ow2.org/components/ftp/version-3">
<tns:attachments>
<tns:filename><xop:Include xmlns:xop="http://www.w3.org/2004/08/xop/include" href="cid:test1.xml"/></tns:filename>
<tns:filename><xop:Include xmlns:xop="http://www.w3.org/2004/08/xop/include" href="cid:test2.xml"/></tns:filename>
</tns:attachments>
</tns:mgetResponse>
{code}
The service might return a Fault when an element in the request is missing or if the FTP connection failed
\\
The available exchange pattern is : *InOut*.
h3. Dir Operation
When the dir operation is set on the incoming IN message, the component returns the file names listed from the FTP
server.
The IN message looks like :{code:lang=xml}
<?xml version="1.0" encoding="UTF-8"?><ver:dir xmlns:ver="http://petals.ow2.org/components/ftp/version-3">
</ver:dir>{code}
The OUT message returned to the consumer is defined as follow :
{code:lang=xml}<tns:dirResponse xmlns:tns="http://petals.ow2.org/components/ftp/version-3">
<!--Zero or more repetitions:-->
<tns:filename>file1.txt</tns:filename>
<tns:filename>linux.jpg</tns:filename>
</tns:dirResponse>
{code}
The service might return a Fault when an element in the request is missing or if the FTP connection failed
The available exchange pattern is : *InOut*.
h3. Del Operation
When the del operation is set on the incoming IN message, the component delete the remote file.
The IN message looks like :
{code:lang=xml}
<?xml version="1.0" encoding="UTF-8"?><ver:del xmlns:ver="http://petals.ow2.org/components/ftp/version-3">
<ver:filename>?</ver:filename>
</ver:del>
{code}
The service does not return a message.
The service might return an Error when an element in the request is missing or if the FTP connection failed.
The available exchange pattern is : InOnly.
h2. Configuration
{anchor:GenericModeConfiguration}
h3. Generic Mode
To allow the component to provide his generic service, the component must have a wsdl with the name : component.wsdl. An example of this file is available in the component.
To deactivate the generic service supplies by the component,simply erase the file : component.wsdl.
To configure the FTP connection in your XML message request, you have to provide a connection element.
\\ {code:lang=xml}
...
<ver:connection>
<ver:server>?</ver:server>
<ver:port>?</ver:port>
<ver:user>?</ver:user>
<ver:password>?</ver:password>
<!--Optional:-->
<ver:folder>?</ver:folder>
<ver:transfer-type>ascii|binary</ver:transfer-type>
<ver:connection-mode>active|passive (optional, default is active)</ver:connection-mode>
<ver:delete-processed-files>true|false(optional, default is active)</ver:delete-processed-files>
<ver:encoding>?</ver:encoding>
</ver:connection>
...
{code}
Example of a PUT request :
{code:lang=xml}<?xml version="1.0" encoding="UTF-8"?>
<ftp:put xmlns:ftp="http://petals.ow2.org/components/ftp/version-3">
<ftp:body>xml body</ftp:body>
<ftp:filename>file name on the FTP server</ftp:filename>
<ftp:connection>
<ftp:server>192.168.1.206</ftp:server>
<ftp:port>21</ftp:port>
<ftp:user>user1</ftp:user>
<ftp:password>test</ftp:password>
<ftp:folder>/home/user1/integration</ftp:folder>
<ftp:transfer-type>binary</ftp:transfer-type>
<ftp:connection-mode>active</ftp:connection-mode>
<ftp:delete-processed-files>false</ftp:delete-processed-files>
<ftp:encoding>UTF-8</ftp:encoding>
</ftp:connection>
</ftp:put>
{code}
h3. Service Unit Mode
An example of a Service Unit descriptor to provide an FTP service:
\\
{code:lang=xml}<?xml version="1.0" encoding="UTF-8"?>
<jbi:jbi xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:jbi="http://java.sun.com/xml/ns/jbi"
xmlns:ftp="http://petals.ow2.org/components/ftp/version-3"
xmlns:petalsCDK="http://petals.ow2.org/components/extensions/version-5"
version="1.0">
<jbi:services binding-component="true">
<jbi:provides
interface-name="ftp:Ftp"
service-name="ftp:myFTPSUServiceName"
endpoint-name="myFTPSUEndpointName">
<!-- CDK specific elements -->
<petalsCDK:timeout>30000</petalsCDK:timeout>
<petalsCDK:validate-wsdl>true</petalsCDK:validate-wsdl>
<petalsCDK:wsdl>FtpService.wsdl</petalsCDK:wsdl>
<petalsCDK:retrypolicy>
<petalsCDK:attempts>3</petalsCDK:attempts>
<petalsCDK:delay>20</petalsCDK:delay>
</petalsCDK:retrypolicy>
<!-- Component specific elements -->
<ftp:server>192.168.1.206</ftp:server>
<ftp:port>21</ftp:port>
<ftp:user>user1</ftp:user>
<ftp:password>test</ftp:password>
<ftp:folder>/home/user1/integration</ftp:folder>
<ftp:transfer-type>binary</ftp:transfer-type>
<ftp:connection-mode>active</ftp:connection-mode>
<ftp:delete-processed-files>false</ftp:delete-processed-files>
<ftp:encoding>UTF-8</ftp:encoding>
<ftp:max-idle-time>10000</ftp:max-idle-time>
<ftp:max-connection>-1</ftp:max-connection>
</jbi:provides>
</jbi:services>
</jbi:jbi>{code}
{include:0 CDK BC SU Provide Configuration}
\\
{center}{*}Configuration of a Service Unit to provide a service (FTP)*{center}
{table-plus}
|| Parameter || Description || Default || Required ||
| server | IP or DNS name of the server | {center}\-{center} | {center}Yes{center}{center}except when using FtpService{center} |
| port | the port number of the FTP server | {center}21{center} | {center}No{center} |
| user | the user login name used to connect to the server | {center}\-{center} | {center}Yes{center}{center}except when using FtpService{center} |
| password | the user password | {center}\-{center} | {center}Yes{center}{center}except when using FtpService{center} |
| folder | the folder on the FTP server | {center}\-{center} | {center}No{center} |
| filename | file name for the standard PUT operation (write the XML message content on the FTP server) | {center}content.xml{center} | {center}No{center} |
| connection-mode | In Active mode, the connection port is set by the client. In Passive mode, it is set by the server (default is Active) | {center}active{center} | {center}No{center} |
| transfer-type | transfer mode used for put or get files ascii/binary | {center}ascii{center} | {center}No{center} |
| delete-processed-files | If true, the service delete the files processed by operation get or mget | {center}false{center} | {center}No{center} |
| encoding | Set the encoding encoding value used to process FTP operation | {center}Default JVM Encoding{center} | {center}No{center} |
| max-idle-time | Max idle connection time (milliseconds). Default value is 10000ms | {center}10000 ms{center}\\ | {center}No{center}\\ |
| max-connection | This parameter specifies the maximum number of simultaneous connection allowed by the FTP server. \\ | {center}\-1 (unlimited){center}\\ | {center}No{center}\\ |
{table-plus}
{include:0 CDK SU Interceptor configuration}
h4. Service Unit content
The Service Unit has to contain the following elements, packaged in an archive:
\\
* The META-INF/jbi.xml descriptor file, has described above,
* An optional wsdl file describing the related service
{code}service-unit.zip
+ META-INF
- jbi.xml (as defined above)
- service.wsdl (optional)
{code}
h1. Component Configuration
{include:0 CDK Component Configuration Table 5.5.0}
{include:0 CDK Parameter scope}
{include:0 CDK Component Interceptor configuration}
h1. Monitoring the component
{warning}In this documentation, the term "Allocated threads" must be understood as "Active threads", see [PETALSDISTRIB-37|https://jira.petalslink.com/browse/PETALSDISTRIB-37]. This naming error will be fixed in the next version.{warning}
h2. Using metrics
Several probes providing metrics are included in the component, and are available through the JMX MBean '{{org.ow2.petals:type=custom,name=monitoring_*<component-id>*}}', where {{*<component-id>*}} is the unique JBI identifier of the component.
h3. Common metrics
{include:0 CDK Component Monitoring Metrics 5.5.0}
h3. Dedicated metrics
No dedicated metric is available.
h2. Receiving alerts
Several alerts are notified by the component through notification of the JMX MBean '{{org.ow2.petals:type=custom,name=monitoring_*<component-id>*}}', where {{*<component-id>*}} is the unique JBI identifier of the component.
{tip}To integrate these alerts with Nagios, see [petalsesbsnapshot:Receiving Petals ESB defects in Nagios].{tip}
h3. Common alerts
{include:0 CDK Component Monitoring Alerts 5.4.0}
h3. Dedicated alerts
No dedicated alert is available.